Fuse: 2.5A
4-8-16ohm
SPEAKER
OUT-1
SPEAKER
OUT-2
8-16ohm
Min. impedance
4ohm
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCTS
TO RAIN OR MOISTURE
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
CAUTION!
SERIAL NO:
Made in EU
THIS APPARATUS MUST BE EARTHED
SELECTABLE POWER OUTPUT: STAGE: 40W/90W (RMS) / STUDIO: 12W/20W (RMS)
MAINS
STAGE
STUDIO
MASTER TUBE
DESIGN
LINE
OUT
SEND
RET.
FOOT
SW.
1
2
3
6
6
8
7
4
5
9
series
Guitar Amplifier.
Master
SPECIFICATIONS
Power output - 90 Watt / 4ohm, 8ohm,16ohm
Power brake to 40W, 20W, 12W
Speakers impedance auto detection
Tubes: 12AX7
Two channels preamp
Channel controls:
BASS, MIDDLE, TREBLE, GAIN-1, GAIN-2, PRESENCE, VOLUME-1, VOLUME-2
Additional futures: INPUT-BOOST, BASS-RANGE, MID-RANGE
Serial effects loop
LINE OUTPUT with speaker simulation
The ability to send the linear signal with or without simulation or both at the same time
Footswitch - GAIN-1/GAIN-2 and VOLUME-1/VOLUME-2
Voltage selector: 230V/50Hz or 120V/60Hz
Dimensions: (H x W x D) 180 x 395 xx 185 mm
Weight: 4,1kg
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
- LINE OUT dual line output: with and without speaker cabinet simulation
- SEND serial effect loop output
- RETURN serial effect loop input and input to power amp section.
- FOOT-SWITCH input for channel selector footswitch.
- POWER BRAKE power selector switch allows power reduction.
In position STAGE we have available power 40W or 90W selected by the
switch [17] on the front panel. In position STUDIO we have available
power 12W or 20W selected by the switch [17] on the front panel.
- Speakers output / impedance: 4-8-16ohm [auto detect. impedance]
- POWER on/off switch.
- Voltage selector 230V/120V
- AC POWER input with FUSE: 2,5 A/230V [4A/120V]
REAR PANEL
