Taurus GRECO 16 ELEGANCE, Руководство пользователя, Страница: 7 / 15

has a leak.
-Do not force the power cord. Never use the
power cord to lift up, carry or unplug the
appliance.
-Do not clip or crease the power cord.
-Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
-The appliance is not suitable for outdoor use.
-Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
-Do not use or store the appliance outdoors.
-Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
-Do not touch the plug with wet hands.
-Do not touch any of the appliance’s moving
parts while it is operating.
USE AND CARE:
-Fully unroll the appliance’s power cable before
each use.
-Do not use the appliance if the on/off switch
does not work.
-Use the appliance handle/s, to catch it or move
it.
-Do not use the appliance if it is tipped up and
do not turn it over.
-Do not turn the appliance over while it is in use
or connected to the mains.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
-Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
-Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the
appliance from operating correctly.
-Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE:
-Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer’s liability null and void.
DESCRIPTION
A Grille ring
B Nut and screw
C Front grill
D Propeller fastening nut
E Propeller
F Grill fastening nut
G Rear grill
H Motor shaft
I Motor housing
J Oscillation knob
K Speed buttons
L Desk fan base
M Screws for the base
N Non-slip feet
O Pole retaining screw (*)
P Adjustable pole (*), (**)
Q Adjustable pole knob (*)
R Lower base pole (*)
S Fan base cover (*)
T Screws for the base (*)
U Round base (*)
V Cross base (*)
W Non-slip feet (*)
(*) Only available in the model GRECO 16C /
GRECO 16CR ELEGANCE
(**) If you do not see this part, ensure it is not
located inside the lower base pole (R) before con-
tacting our technical service, remove it carefully
to avoid any damage.
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTALLATION
-Be sure to remove all packaging material from
inside the appliance.
-Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.