Taurus FX9.9, Руководство по сборке и эксплуатации

Страница: 34 / 48

34
FX9.9 Touch
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠
WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault Cause Solution
The drive disc
is wobbling or
producing noises
Drive disc is loose Tighten the nut
Display doesn't
function
Cables not properly
connected
Check all cable connections
Pedals are squeaking Pedals are loose Tighten the screws in the pedals
Squeaking noises Screws have loosened Check that all the screws are tightened
Rails are squeaking
The rails and/or wheels are
dirty or the rails are dry
Clean the rails and wheels
Re-lubricate the rails with fat-free silicon
No pulse displayed
+ Source of interference in
the room
+ Chest strap is not
compatible
+ Position of the chest
strap is incorrect
+ Batteries are empty
+ Eliminate the source of interference
(e.g. Mobile, Speakers, etc.)
+ Use a compatible chest strap (see
recommended accessories)
+ Re-position the chest strap and/or
moisten the electrode(s)
+ Change the batteries