Taurus Barbell Rack X2 Pro, Руководство по сборке и эксплуатации

Страница: 13 / 28

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of Base and Upright
1. Asmble the base (2) with one reinforcement plate (9) to the right upright (3) by using two
screws (19), four washers (21) and two lock nuts (24).
2. Asmble the base with wheel (1) with one reinforcement plate (9) to the right upright (3) by using
two screws (19), four washers (21) and two lock nuts (24).
3. Repeat all steps for the left side.