Problem
Possible Cause
Suggested Solutions
The compressor works
abnormally with a Buzzing
noise.
The voltage is lower
than recommended.
Stop the ice maker and do not restart
until the voltage is normal.
ADD WATER indicator
light is on.
1.There is no water,
2.The pump is full
of air.
1. Press the stop button, fill with water,
wait 3 minutes and press the start
button to restart. When the water has
reached the fill line the ice maker will
restart automatically.
2. Remove the silicon stopper and let
several drops water runs out.
Indicator lights on display are
not on.
Blown fuse/ No
power.
Replace fuse / Turn power on.
The Ice made is too large
and with pieces sticking
together.
1. Ice of previous
cycles left in the
water tray.
2. The evaporator is
too low.
1. Stop the unit right away,restart the
unit till the ice in water tray melt down
2. Shift the evaporator a little.
Conditions for Ice making
Cycle are right but no ice is
made.
1. There is no
refrigerant in the
compressor.
2. Compressor is
broken down Fan
motor is broken.
Call for service.
ICE FULL and ADD WATER
indicator lights come on at
the same time.
Water tray is blocked
by ice cube.
Clear the ice cube under the ice shovel
pull out the plug and insert It again
then press the ”ON/OFF” button, two
minutes later the machine will restart
automatically.
Machine keeps running,but
the water is warmer than the
normal water.
The magnetic valve
is broken.
Replace the magnetic valve.
997150_IM.indd 5
2018/01/15 11:14:02 AM
