Taurus 944657000, Руководство пользователя

Страница: 6 / 36

ENGLISH
Desk Fan
BOREAL 12 LEGEND
DESCRIPTION
A Front grill
B Security screw
C Blades
D
Grill fixing screws
E Rear grill
F Carry handle
G Motor shaft
H Speed selector
I Oscillation knob
J Motor housing
K Base
L
Base fixing screw
M Blades fixing screw
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
-Fully extend the appliance’s power cable before
each use.
-Do not use the appliance if the on/off switch
does not work.
-Do not move the appliance while in use.
-Use the appliance handle/s, to catch it or move
it.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
-Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
-Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
INSTALLATION
-Be sure to remove all packaging material from
inside the appliance.
-Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.
-The plug must be easily accessible so it can be
disconnected in an emergency.
ASSEMBLING THE BASE:
-To fix the base into the appliance, place the
appliance face down.
-Fit the base on the main body of the appliance.
-Fix the base using the screw provided (Fig.1).
-Stand the appliance up again so as to check
that the base works properly.
ASSEMBLING THE GRILL AND THE
PROPELLER:
-Fit the rear grill (E) on the motor housing (J),
matching their fitting points.
-Tight the screws (D) to fix the grill, make sure it
has a correct setting.
-Fit the blades (C) on the motor shaft (G) and fix
them trough the blades fixing screw (M).
-Fit the front grill (A) front the rear grill (E),
matching the security screw position. Fix the
front grill by using the hooks and tight the secu-
rity screw (B) by using a screwdriver.
-Check the correct rotation of the propeller.
INSTRUCTIONS FOR USE
USE:
-Connect the appliance to the mains.
-Guide the appliance to direct the flow of air in
the desired direction.
-Turn the appliance on, by using one of the
speed selection buttons.
OSCILLATION FUNCTION:
-The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
-To activate this function, turn the knob (I).
-To deactivate this function, follow the proce-
dure for switching it on in reverse.