Taurus 4257166, Инструкция по эксплуатации

Страница: 20 / 40

19
After Sales Support EMAIL: service.australia@einhell.com TEL: 1300 922 271
before using the appliance. Do not use the saw if the
bottom safety hood does not move freely and does not
close immediately. Never clamp or tie the bottom guard
hood in open position. If you drop the saw by accident the
bottom guard hood may become bent. Open the safety
hood with the lever and ensure that it moves freely and will
not come into contact with the saw blade or other parts
regardless of the cutting angle and depth.
b) Check the function of the spring on the bottom safety
hood. Have the appliance serviced before you use it if the
bottom safety hood and spring are not in perfect working
order. Damaged parts, sticky deposits or accumulations of
chips will result in the bottom guard hood working with a
delay.
c) Open the bottom safety hood by hand only for special
cuts, such as “immersion and angle cuts”. Open the bottom
safety hood using the lever and release the lever again as
soon as the saw blade has engaged in the workpiece. The
bottom safety hood must operate automatically for all other
sawing work.
d) Do not place the saw on a workbench or on the floor
unless the bottom guard hood is covering the blade. An
unprotected, moving saw blade will cause the saw to move
opposite to the sawing direction and saw through anything
in its way. Remember that the saw takes a little time to slow
down and stop.
7
GB
cause a recoil when the saw is restarted.
d) Support large panels to reduce the risk of a
recoil by a jammed saw blade. Large panels
may sag under their own weight. Panels must be
supported on both sides both near the saw gap
and also at the edge.
e) Do not use blunt or damaged saw blades.
Saw blades with blunt or incorrectly aligned teeth
will create increased friction due to the saw gap
being too small. In addition the saw blade may
also jam and cause recoil.
f) Secure the cutting depth and cutting angle
settings before starting to saw. If the settings
change as you are sawing, the saw blade may
jam and cause recoil.
g) Be particularly careful when carrying out a
“plunge cut” in a concealed area such as an
existing wall. The plunge-cutting saw blade may
block when sawing into concealed objects and
thus cause recoil.
Safety instructions for saws with a swing guard
hood
a) Check that the bottom safety hood closes
perfectly before using the appliance. Do not
use the saw if the bottom safety hood does
not move freely and does not close
immediately. Never clamp or tie the bottom
guard hood in open position. If you drop the
saw by accident the bottom guard hood may
become bent. Open the safety hood with the lever
and ensure that it moves freely and will not come
into contact with the saw blade or other parts
regardless of the cutting angle and depth.
b) Check the function of the spring on the
bottom safety hood. Have the appliance
serviced before you use it if the bottom
safety hood and spring are not in perfect
working order. Damaged parts, sticky deposits
or accumulations of chips will result in the bottom
guard hood working with a delay.
c) Open the bottom safety hood by hand only
for special cuts, such as “immersion and
angle cuts”. Open the bottom safety hood
using the lever and release the lever again as
soon as the saw blade has engaged in the
workpiece. The bottom safety hood must
operate automatically for all other sawing work.
d) Do not place the saw on a workbench or on
the floor unless the bottom guard hood is
covering the blade. An unprotected, moving
saw blade will cause the saw to move opposite to
the sawing direction and saw through anything in
its way. Remember that the saw takes a little time
to slow down and stop.
Important: Laser radiation
Do not look into the beam
Laser class 2
Protect yourself and your environment from accidents
by taking the appropriate precautionary measures.
Never look directly into the laser path.
Never direct the laser beam at reflecting surfaces
or persons or animals. Even a low output laser
beam can inflict injury on the eye.
Caution: It is vital to follow the work procedures
described in these instructions. Using the
equipment in any other way may result in
hazardous exposure to laser radiation.
Never open the laser module.
2. Layout /
Items supplied
(Fig. 1a/1b)
2.1 Layout
1. Handle
2. ON/OFF switch
3. Locking button for ON/OFF switch
4. Additional handle
5. Spindle lock
6. Scale for mitre angle
7. Locking lever for parallel stop
8. Locking lever for mitre setting
9. Soleplate
10. Allen key
11. Locking lever for cutting depth setting
12. Battery pack
13. Pushlock button
14. Laser
15. Saw blade
16. Guard hood
17. Lever for opening the swing guard hood
18. Swing guard hood
19. Screw for securing the saw blade
20. Flange
21. Parallel stop
Protect yourself and your environment from accidents by
taking the appropriate precautionary measures.
• Never look directly into the laser path.
• Never direct the laser beam at reflecting surfaces or
persons or animals. Even a low output laser beam can
inflict injury on the eye.
• Caution: It is vital to follow the work procedures described
in these instructions. Using the equipment in any other
way may result in hazardous exposure to laser radiation.
• Never open the laser module.
5.2. LAYOUT / ITEMS SUPPLIED
(FIG. 1A/1B)
5.2.1 Layout
1. Handle
2. ON/OFF switch
3. Locking button for ON/OFF switch
4. Additional handle
5. Spindle lock
6. Scale for mitre angle
7. Locking lever for parallel stop
8. Locking lever for mitre setting
9. Soleplate
10. Allen key
11. Locking lever for cutting depth setting
12. Battery pack
13. Pushlock button
14. Laser
15. Saw blade
16. Guard hood
17. Lever for opening the swing guard hood
18. Swing guard hood
19. Screw for securing the saw blade
20. Flange
21. Parallel stop
5.2.2 Items supplied
• Open the packaging and take out the equipment with
care.
• Remove the packaging material and any packaging and/
or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
damage.
• If possible, please keep the packaging until the end of the
guarantee period.
IMPORTANT
The equipment and packaging material are not toys. Do not
let children play with plastic bags, foils or small parts. There
is a danger of swallowing or suffocating!
• Cordless Circular Saw
• Saw blade
• Parallel stop
• Allen key
• Original operating instructions
• Charger (1 x in set included)
• Battery Pack (2 x in set included)
5.3. PROPER USE
The hand-held circular saw is designed for sawing straight
cuts in wood, wood-type materials and plastics.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user
/ operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.