CONNECTORS
CONNECTIONS
All types of our speakers are fitted with two input connectors what makes it
possible to build multi−speaker systems. In this kind of connection speakers'
impedance is decreased. The table below presents impedance levels for
particular set−ups. Important issue to remember is not to connect speakers with
overall impedance less then AMP's minimal output impedance because it could
cause overloading and/or damage to the speakers.
When connecting speakers with amplifiers one should always make sure that
left and right speakers are not crossed in phase witch means that the positive
and negative signals are not swapped over in any of the speakers. Phase
mismatch results with worse quality of low frequencies and wrong stereo
image.
Parallel speaker
configurations
Two 8ohm cabinets
Two 4ohm cabinets
One 8ohm cabinet and one 4 ohm cabinet
Two 8ohm cabinets and one 4 ohm cabinet
Three 8ohm cabinets
Four 8ohm cabinets
4ohm
2,7ohm
2ohm
2ohm
2,7ohm
2ohm
Total system
impedance
INPUT
LINK
3 level
TWEETER switch
Concert − 100%
Studio − 60%
OFF
SPEAKON & JACK
Neutrik connector
SPEAKON & JACK
Neutrik connector
TERMINAL
+
-
-
+
JACK MONO
SPEAKON
1+
1-
2+
2-
-
+
PHASE
TYPE
TR−212
TR−1510
TR−410
Power Hending
RMS
Impedance
Sensitivity
(1W/1m)
Configuration
LF − Speakers
Connectors
Weight
Cover
HF − Speakers
HF − Control
500W
500W
1000W
500W
4ohm
100dB
99dB
103dB
102dB
two way
black carpet
2x12"
4x10"
Neodimium
Neodimium
Neodimium
Neo + Ferrite
1x15”+1x10"
1x12”+2x10"
740mm
520mm
405mm
740mm
520mm
405mm
885mm
520mm
405mm
885mm
520mm
405mm
27kg
27kg
32.5kg
32,5kg
SPECIFICATIONS
TR−1210
H
W
D
Dimensions:
HORN level switch
100 − 60% − OFF
4ohm
4ohm
4ohm
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
compression driver
ceramic tweeter
ceramic tweeter
compression driver
