TYPE
TH−212
TH−1510
TH−410
Power Hending
RMS
Impedance
Sensitivity
(1W/1m)
Configuration
LF − Speakers
Connectors
Weight
Cover
HF − Speakers
HF − Control
100dB
99dB
103dB
102dB
two way
2x12"
4x10"
Neodimium
Neodimium
Neodimium
Neo + Ferrite
1x15”+1x10"
1x12”+2x10"
740mm
520mm
405mm
740mm
520mm
405mm
885mm
520mm
405mm
885mm
520mm
405mm
27kg
27kg
32.5kg
32,5kg
SPECIFICATIONS
TH−1210
H
W
D
Dimensions:
HORN level switch 100 − 60% − OFF
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
compression driver
ceramic tweeter
ceramic tweeter
compression driver
+
-
-
+
JACK MONO
SPEAKON
1+
1-
2+
2-
-
+
TERMINAL
polyurethane−hybrid elastomer
600W/2x300W
500W/2x250W
1000W/2x500W
600W/2x300W
4ohm/2x8ohm
4ohm/2x8ohm
4ohm/2x8ohm
4ohm/2x8ohm
CONNECTORS
PHASE
When connecting speakers with amplifiers one should always make sure that
left and right speakers are not crossed in phase witch means that the positive
and negative signals are not swapped over in any of the speakers. Phase
mismatch results with worse quality of low frequencies and wrong stereo
image.
RMS power of the amplifier should not be higher then speaker's RMS power
assuming that impedances of both are equal.
Never overload the power AMP.
Do not connect DC sources to the speakers.
Do not place the speakers close to TV sets, PC monitors, magnetic tapes
and disks, etc.
Protect speakers from water and high humidity.
PRECAUTIONS
MONO mode - standard configuration for connecting all speakers
to one amplifier.
BI-AMP mode - each speaker section can be connected separately.
In this mode, two separate amplifiers can be connected with the cabinet
or use only one selected cabinet's section with one amplifier.
The BI-AMP option can also be used in semi-STEREO mode.
The operating mode switch gives an additional option of changing
the cabinet's impedance.
in mono mode one 4 ohm output
in Bi-AMP mode two 8 ohm outputs
Speakrs Mode Selector
4ohm output in MONO mode
8
(all speakers works)
(top section of the speakers works)
.
ohm output in BI-AMP mode
8ohm input of the bottom speakers
section - active in
BI-AMP mode only.
Tweeter volume level selector:
100% , 60%, OFF.
