ANOMALIES AND REPAIR
-If any anomaly is detected, check the following
table:
Anomalies
Possible Cause
Solution
The unit doesn't operate.
Has the power cord been
disconnected?
Plug the power cord into the outlet.
Is the tank full indication
lamp blinking? (The tank is
full or in a wrong position.)
Empty the water in the drainage tank
and then reposition the tank.
Is the temperature of the
room above 35ºC or below
5ºC?
The protection device is
activated and the unit
cannot be started.
The dehumidifying
function doesn't work
Is the air filter clogged?
Clean the air filter as
instructed under the section
"Cleaning the air filter".
Is the intake duct or
discharge duct obstructed?
Remove the obstruction from the
discharge duct or intake duct.
No air is discharged
Is the air filter clogged?
Clean the air filter as
instructed under the section
"Cleaning the air filter".
Operation is noisy
Is the unit tilted or
unsteady?
Move the unit to a stable, sturdy
location.
Is the air filter clogged?
Clean the air filter as
instructed under the section
"Cleaning the air filter".
The appliance contains flammable refrigerant
Содержание PLEASANT
