B0=Logo Display
(0=OFF
,
1=ON)
OPTION2: (It
’
s better to keep the default setting option2=0)
B5=Half_Contrast (
0=OFF
, 1=ON)
B4=Color 6db (
0=OFF
, 1=ON)
B3=APR Feature (
0=ON
, 1=OFF)
B2=Black Stretch (
0=ON
, 1=OFF)
B1=Auto Flesh (
0=ON
, 1=OFF)
B0=Coring (
0=ON
, 1=OFF)
OPTION3:
B5=AVL (
0=OFF
, 1=ON)
B4=PIF Over modulation (
0=OFF
, 1=ON)
B3=Market_France-SECAM L/L’ (
0=OFF
, 1=ON)
B2=Manual/Auto Cutoff (0=Manual,
1=Auto Cutoff
)
B1=Mute pin Low/High To control the speaker (
0=Low,
1=High)
B0=TDA7449/TDA7439 (
0=TDA7449,
1=TDA7439)
OPTION4:
B4=SCART2 (
0=
OFF, 1=
ON
)
B3=RGB (
0=
OFF, 1=
ON
)
B2=SVHS (
0=OFF
, 1=ON)
B1=AV2 (0=OFF,
1=ON)
B0=AV1 (0=OFF,
1=ON)
OPTION5 and ST Ttext is for teletext setting only. It normally could not be changed. If
it
’
s necessary to adjust the OPTION 5, please read the following information before
adjustment.
A.
For CPUs with English, French, German, Polish or English, French, German, Turkish,
Please refer to the setting as below.
1. If OPTION 5 = 00, then the TEXT languages like "ENGLISH, FRENCH, SWEDISH,
TURKISH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN " can be decoded.
2. If OPTION 5 = 02, then the TEXT languages like "POLISH, FRENCH, ESTONIAN,
CZECH, GERMAN, SERBIAN, LETTISH, RUMANIAN " can be decoded.
3. If OPTION 5 = 04, then the TEXT languages like "ENGLISH, FRENCH, SWEDISH,
CZECH, GERMAN, PORTUGUESE, LETTISH, RUMANIAN " can be decoded.
4. If OPTION 5 = 06, then the TEXT languages ENGLISH, FRENCH, SWEDISH, TURKISH,
GERMAN, PORTUGUESE, LETTISH, RUMANIAN can be decoded.
B. For coming new OTP/CPU with English, Russian, Czech, Polish, the setting of the OPTION
5 will be changed as below.
1. If OPTION 5 = 00, then the TEXT languages like "ENGLISH, FRENCH, SWEDISH,
CZECH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN " can be decoded.
2. If OPTION 5 = 02, then the TEXT languages like "ENGLISH, RUSSIAN, SWEDISH,
TURKISH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN " can be decoded.
3. If OPTION 5 = 04, then the TEXT languages like "POLISH, RUSSIAN, SWEDISH,
CZECH, GERMAN, SERBIAN, ITALIAN, RUMANIAN " can be decoded.
4. If OPTION 5 = 06, then the TEXT languages like "POLISH, RUSSIAN, SWEDISH,
CZECH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN can be decoded.
Normally, it is supposed not to set OPTION 5 = 01. If you set the OPTION 5 = 01, then the font
can be switched by press key MENU on remote control in TEXT mode for TV3K. If you set
OPTION 5 = 00, 02, 04, 06, then there is no any activity while press MENU in TEXT mode.
Please check.
A.F.C. ADJUSTMENT
Removing any R.F. signal source and prevent any stray signal source from entering
the tuner by shorting the tuner input inner contact to the out screen.
Inject the 38.9 MHZ carrier into the tuner IF output pin (pin 11).Select the parameter
‘
VCO Coarse
’
in the service mode (see Table 2).The
‘
VCO Status
…’
will appear on the
screen. Then press the
‘
AV
’
key on remote control, the CPU will adjust automatically
until the
‘
VCO Status OK
’
appears on the screen. If this can not be achieved, i.e. there
is no any pattern on the screen, please adjust the T201 first until a stable pattern
