M
icrowave
Motion Sensor (DOORRADMB)
Instruction Manual -
rev.02 del 27/02/2014
The DOORRADMB is a high performance motion detection sensor specifically designed for the activation of automatic doors.
For the safe and accurate use of this product, please read this instruction manual carefully.
1
Technical specifications
2
General Information
3
Installation Guide
7
Detection Area Position Adjustment
Min. Max.
Power supply :
DC 12~30V, AC 12~24V
Product Size :
120mm x 70mm x 41.5mm (W x L x H)
Microwave module :
24.125GHz
Hold time :
1.2 Sec.
Detecting field :
4m x 3m (W x D) (Height 2.2m)
Current consumption :
< 1.4W
Contact capacity :
0.5A/125VAC, 1A/24VDC
Max Install height :
4.0m
Operating Temp/Humidity :
-20°C~+60°C/0~90%
International Protection : IP54
NO
NC
2
1
3
Sensitivity is adjustable
by setting the volume on
the sensor body
4
< Default value :
NO
>
<Accessories>
Mounting Template
Cable
Screw
Instructions
Cable Hole
Screw Hole
Sensitivity volume
Connector
LED
4
Sensitivity Adjustment
DC 12~30V
AC 12~24V
Output
(Gray)
(Yellow)
2 power wires & 2 relay contact wires.
5
Wiring Diagram
8
Detection Field
Sensing Module
Cover
Sensor Body
TAU S.r.l.
Via E. Fermi, 43 - 36066 Sandrigo (VI) Italy - Tel: +39 (0)444 750190 Fax: +39 (0)444 750376 www.tauitalia.com
(Mounting Height : 2.2m)
Default
Sensitivity
Sensing module
vertical angle
S0 : 27°
Sensing module
vertical angle
S2 : 41°
S0 :
0 Step(27°)
Left angle rotation : 15°(Max : 30°)
Front angle rotation : 0°
Right angle rotation : 15°(Max : 30°)
S1 :
1 Step(34°)
S2 :
2 Step(41°)
S4 :
4 Step(55°)
Module
vertical angle
27°
41°
Affix mounting template to
transom and drill holes.
Connect power cable to the
sensor body
Attach the sensor body to the wall
Tilt the sensing module angle
Up • Down • Left • Right to change the
detection area
Do not supply power during installation.
Do not disassemble or modify the device, it may cause fire or electric shock
Adjust the Sensing module up and down to achieve a detection area close to or far from the door.
Adjust the Sensing module to the right and left to achieve the desired side approach detection area.
6
Mounting Information
Avoid moving objects close
to the sensor
1
Avoid vibration
3
Avoid heavy rain and snow
2
Avoid fluorescent light sources
4
9
Weather Cover
(sold separately)
MODEL: WCHR50
The specifications of this product can be changed without prior notice
m
m