tau 300SCMS1, Руководство пользователя

Страница: 2 / 8

2
MAGNETIC KEY READER 8 BITS
TECHNICAL FEATURES:
MAGENTIC READER TRINARY
Power supply 12Vdc Decoder
Dimensions (mm) 75x75x62
Power Consumption
(Stand by)
20 mA
Power Consumption
(In use)
120 mA
Reader max./Decoder 4
Material Zamak or plastic
Channels 1 (2,3 hierarchical readers)
MAGNETIC KEY TRINARY (8 MAGNETS)
Numero de combinaciones 6.561
Sistema de codificación Imanes
INSTALLATION:
It is important not to power on the “reader” before making the connec -
tions.
- Pull out the front of the “Magnetic Lock” by pressing with small
screwdriver on the two holes in the bottom of the main box. With
this you can then unlock the two tabs on the front where is the
circuit, pull it out and connecting. Previously you have to pass the
cable through the corresponding hole of the main box.
- The connection of the magnetic reader to the decoder is performed
by means of the inclined terminals of the two components where
“+” and “-” is the power to 12Vdc provided by the decoder, and “S”
and “C” are the data signals.
- Once connected, close the magnetic reader.
For connecting use flexible cable 4x1mm.
To facilitate installation on different surfaces, we have been provided
extra equipment like:
- recessed box (on the wall)
- for surface box
- metal column.
OPERATION:
Place the magnetic key on the pre-formed relief of the structure.
The upper two color led will flash (red) to indicate the correct positio -
ning.
If the transmitted code correspond with that of the decoder, the relay
will activate and the led will flash (green).
If it does not work:
- Check the decoder supply voltage
- Check the continuity of the cable that connects the reader with the
decoder
- Check that the key coding is identical to that
of the decoder
- Ground the metal reader
KEY ENCRYPTION:
- Extract the magnet holder loca-
ted in the lower part of the key using
a screwdriver, by turning through 90° to un -
lock it. Afterwards you can pull it out with your
fingers.
- The magnet holder has 10 niches identified
from number 1 to 8, “C” and “I”.
The numbers from 1 to 8 place the magnets that are used to dial
the “trinary” code that will coincide with the micro-switches of the
decoder.
The niche identified as “C” must be left without magnet.
The magnet placed on “I” position must always be positioned, sin -
ce without the magnetic reader can not work.
By default, the magnet keys have all the magnets positioned with
the visible black side.
To change the magnets position insert a small screwdriver on the cen-
tral slots and then turn its
DECODER-KEY MATCHING
CODE SELECTION
KEY (MAGNETS 1-8)
DECODER
(MICROINT.1-8)
WITHOUT MAGNET +
MAGNET (BLACK SIDE) 0
MAGNET (WHITE SIDE) -
CHANNEL SELECTION
KEY (MAGNET “C”)
DECODER (SELEC-
TION BRIDGE 1-2-3)
MAGNETIC REA-
DER
WITHOUT MAGNET 1° CH
NORMAL/HIE-
RARCHICAL
MAGNET (BLACK
SIDE)
2° CH HIERARCHICAL
MAGNET (WHITE SIDE) 3° CH HIERARCHICAL
English
- + S C