2.
and add water to appropriate level.
Ex: To cook 4 cups of rice, need to pour water up
to level 4 for rice.
The water volume can be added or reduced
according to personal treference and rice variety.
Never add in water over the maximum level.
Pour washed clean rice into rice cooker inner pot,
3. Clean and dry outside of inner pot, then put it back
to the rice cooker gently and turn left and right to
make it adequately contact with heating plate.
No foreign matter exists between inner pot and
heating plate.
Please
clean
before
cooking
if
any
foreign
matter
exits
between
1. Measure rice with measuring cup. into a container
then wash rice in the container.
4. Plug power cord to the outlet and plug in the
other end to the rice cooker.
Operation
2
9
Malfunction check
Series
Malfunction
Problem
Resolution
1
2
3
1. Middle connection loose
2. Heating plate component
is burned up
4
5
1. Steam valve
badly
2. Steam regurgitation valve
deformation or smudgy
installed
1. Install as instruction
1. Heating plate deformation
2. Inner pot tilted to one side
3. Foreign mater exists between
inner pot and heating plate
4. Inner pot deformation
5. It’s varied from the rice
1. Indicator connection loose
2. Indicator is broken
Spill
1. Cook key disconnect to
the leverage linker
2. Alnico temperature
restrictor failure
3. Thermostrat burned or loose
In
d
ic
a
to
r
fa
il
u
re
In
d
ic
a
to
r
w
o
rk
Plate doesn't
heat up
Plate heat up
Rice is not done
well or cooking
time is too long
Rice burned or
over done or can
not keep warm
Circuit and power disconnect
S
Department
end to Tatung Service
2.Clean and maintain according
to requirement
Make sure switch, socket,
fuse, power conductor has
no failure, and plug in well
Plate doesn't
heat up
All the data are checked to the letter. If any misunderstanding occurs due to the print failure
or misunderstanding of the content, our company withholds the right of final explanation.
If technical improvement occurs, it will be included in new version of user manual and will
not inform; the product appearance, color changes, please refer to the actual product.
1. Serious deformation send to
Tatung Service Department
2. Turn around the inner pot to
make it normal.
3. If stick foreign matter wipe
clean with sand paper.
4. Purchase new inner pot from
retailer stores.
5. Anneal rice according to
requirement
S
Department
end to Tatung Service
S
Department
end to Tatung Service
Warranty:
After both outlets plugged in, if the warmer switch is in
the "ON" position, the "WARM" light indicator will be
switched to the cook position after 2 to 3 minuets. It does
not mean the rice is being cooked. It means the rice
cooker is ready for cooking. If the warm switch is on the
"OFF" position, then no "WARM" or "COOK" light will be
lit unless the cook button is pushed down for cooking.
Please be aware of the purpose of the warmer switch.
The warmer switch does not contain cooking function but
whether to keep rice warm or not. Please notice that user
must push down the cook button in order to cook rice.
By closing toward to the end of cooking process, there
will be some water boiling sound and a switch click
sound. At this moment, the cooking process has been
completed. Please allow 10-15 minutes more to open
the lid so the rice will be better cooked. If the warmer
switch turned on, the "WARM" light indicator will be
automatically lid. In the mean time, keeping warm
function starts. If the warmer switch is turned off, no
indicator light will be lid after cooking. Please be
aware of the condition affected by the warmer switch.
5.
6.
If
the
inner
pot
is
damaged
to
certain
level
or
any
foreign
matter
exits
on
the
heating
plate
,
it
may
cause
overheat
on
the
rice
cooker
.
Users
must
avoid
any
of
improper
use
,
such
as
force
cook
bottom
down
to
stir
fry
and
deep
fry
.
Tatung
Co
.
of
America
,
Inc
.
will
not
be
responsible
for
any
misusage
.
Please contact 310.637.2105 Ext.216 ragarding any
service question.
180 days limited warranty.
Special announcement
：
2
4
6
8
10
