Tatung TPAC-09K, Инструкция по эксплуатации

Страница: 13 / 31

- 13 -
During the cooling or dehumidifying mode
,
the condenser water will be drained into the internal water tank
.
Since this unit is equipped with a self
-
evaporative system
,
the condenser water will be used to cool the
condenser making the unit run more efficiently
.
However
,
if the unit is used in high humidity areas
,
the water
may need to be drained out
.
When the water tank is full
,
the water full indicator at LED control panel will light
up and the compressor will stop running
.
The buzzer will s ound for
10
times every
5
minutes unit the water is
drained out
.
After draining out the water
,
the alarm will stop and the unit will work normally
.
The compressor will start to run
five minutes after the power is back on
.
You can drain the water out with a drainpipe
(
included
).
Please follow the steps to drain the water
:
1.
Turn off the power
;
2.
Place a plate
,
pan or container under the drain
mouth
;
3.
Remove the water stopper from the drain mouth
,
thus the condenser water will flow out of the water
tank
.
4.
If you want to continuously drain the water
,
please
use the drainpipe and follow the steps
:
(1)
Turn off the power
;
(2)
Place a plate
,
pan or container under the
drain mouth
;
(3)
Take off the water stopper
(4)
Connect the supplied drainpipe to the water
mouth
,
and place a container at the end of
the pipe to collect the water
.
The condenser water will drai n out automatically into the
container
.
(5)
If you want to extend the drainpipe
,
you can use
9
mm I
.
D
.
plastic pipe to connect with the
supplied drainpipe
.
Attention
:
Do not move the unit while the water is full
.
It may cause the water to overflow on the floor
and damage the product.
WATER DRAINAGE