6
DC INPUT: Use the supplied 12V DC power supply
HDMI: HDMI Connector
HD Analogue 1 IN: BNC Connector support CVBS/TVI/AHD/CVI
HD Analogue 2 IN: BNC Connector support CVBS/TVI/AHD/CVI
HD Analogue 2 OUT: BNC Connector support CVBS/TVI/AHD/CVI
Set up sequence
1. Make sure the power of PC and/or Video source were turned off.
2. Connect the video signal to monitor.
3. Turns the PC and/or Video source power on.
4. Plug the power supply to DC jack
(Use reverse sequence to teardown the monitor)
3. Controls and indicators
Power
-
+
Menu Source
SOURCE:
Select input source
– HDA1, HDA2, HDMI.
MENU:
Access the On Screen Display (OSD) menu.
＋
and
－
:
Controls left/right, Change the size of the value
.
POWER:
Turns the monitor on or off.
1.
To access the OSD Menu press ‘MENU’.
2. Press
the ‘SOURCE’ buttons to select the function, then press the ‘
＋
’ or ‘
－
’button to
select the sub menu.
3. Press
the ‘SOURCE’ button to confirm the sub menu, then press ‘
＋
’ or ‘
－
’ to adjust
the setting.
4.
Press the ‘MENU’ button to return to previous menu.
5.
Press the ‘MENU’ button again to exit the OSD Menu.