
Installation & Connection
Power Connection
Plug one end of the power cord into the input port of the machine's power supply and then
insert the other end into the socket of the electrical source (
Notes:
1. When connecting the power cord, be sure to turn off the machine
and other equipment
's power.
2. If a long time at leisure, please disconnect it from power supply.
3.
Base installation
AC 100V-240V, 60/50Hz).
This monitor must be connected to a three pin socket outlet for
safety.
1. After taking the monitor out of the carton,
carefully turn the monitor on front side.
2. Align the base with the knighthead of the
monitor and push the base in the direction
of arrows until the fasteners both on the
knighthead and the base are well
connected.
3. Insert the plastic pin into the base in the
direction of arrow, then use screwdriver to
lock the bolt firmly.
Note
: Remove the base by the contrary order
above.
6
Содержание TME 17
Страница 1: ...L C D MONITOR T M E 1 7 ...