Tatung TDR-22 Series, Инструкция по установке и эксплуатации

Страница: 32 / 64

TATUNG TDR series Digital Recording System Page
28
4.1 Channel play back window
This area is the 16 channel play-back window. All channels can be played back synchronously.
•
Display one specific channel only:
You can always left click a specific channel to highlight this specific channel
in the middle of the window and enlarge it. By left clicking again you can go
back to the multi channel playback.
•
Mute, night vision, and digital zoom.
1. Mute
Mute the audio of this channel by checking the mute box.
2. Night Vision
Check the night vision box to enhance the brightness of the picture.
3. Digital Zoom
Check the digital zoom box and use right-click and left-click to enlarge or
shrink the image. This function is only available when playback is
stopped
•
Object Search
This feature is used to search a specific area on a camera for motion. To
access this function you must be in search mode and select the specific
camera you want to perform an object search on.
Click on this button to activate the object view mode.
Channel
Name
Note: You can always enlarge a
specific channel by left clicking
on the channel. You can also
left click again to back to the
multi-channel playback mode.
Note : For TDR-2209 there are
only 9 channels divided within
the screen. For TDR-2204 there
are only 4 channels divided
within the screen
1. Set up motion detection zone(s).
Setup the motion detection zone for each channel by clicking and
dragging. It will be designated by a red square (Maximum 10 areas).
2. Set up OPTIONS (please see the left picture)
Adjust Sensitivity and whether you want to view the image while
searching or not. Then click
OK
3. Begin search
Click START to begin search. Once motion is detected the search will
stop and alert you of the detection. To continue searching for the next
occurrence of motion click
START again to begin the search again.
4. STOP search
Click STOP to stop the search.
5. Return to previous detected occurrence
Click BACK to return to the previous occurrence of motion detected.
6. Exit Object Search Mode and Clear blocks
Press MODE again to exit Object Search Mode and clear the search
blocks.