7.
Remove the 2 bolts at the frame where the Frame Gusset will sit. Set aside.
8.
Get your lower 4130 Chromoly Frame Gusset and place behind the radiator/fan
shroud assembly. Start loosely assembling the lower outside frame gusset onto
the frame with the hardware you took off in Step 7. Follow by loosely assembling
the rest of the lower gusset onto the frame.
9.
Assemble the upper Billet Shock Tower Brace onto the car by placing it between
the fan shroud and frame gusset using the countersink hardware provided.
10.
Getting ready to assemble the shocks back on the car, you will need to flip your
shocks from one side to the other. Now, your reservoir will be on the outside of
the shock.
(This will not work if you take the same side and twist the shock 180
degrees. The shocks will need to move from the Left Side to Right and vice versa.)
11.
Loosely assemble upper shock hardware through the shock tower brace, shock,
and frame.
12.
Loosely assemble shock at the a-arm.
Make sure to connect your smart shox
wires if you have them.
13.
Assemble fan shroud back onto the car with the factory lower bolts and new
hardware provided on the top.
14.
Tighten all hardware on shocks, frame, fan shroud and gusset kit.
15.
Re-install front fascia back on car including wires for head lights.
Congratulations! You have successfully completed your Tatum UTV upgrade! We cannot wait
to see your build on Instagram & Facebook. Follow and tag us @TatumUTV.
If you have any questions or concerns with your order, please email
