26
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GAIM
Adjustments and operations
Cutting depth adjustment
Increase the "A" angle for a greater penetration.
Decrease the "A" angle for a lesser penetration.
Use the rod stops (A) in
the hydraulic cylinder (B) rods to
control the depth.
B
The cutting depth can be adjusted following the next steps:
• Disc gangs opening.
• Increase the opening (A) angle between the gangs to work on soils that are harder
to penetrate. In loose soils, the disc blades must penetrate less.
• To open or close the harrow, activate the locking adjustment and move the harrow
forwards or backwards until the desired point.
• If the harrow is equipped with a hydraulic cylinder, the activation is done by the
operator through the control valve.
• Note that the harrow opening only changes the cutting angle of the rear gang.
A
The harrow activation to
open or close the gangs
must be done gradually,
b e i n g t h e t r a c t o r i n
movement.
NOTE
A
Содержание GAIM
Страница 1: ...INSTRUCTIONS MANUAL GAIM...
