Rev. D
2017-07-25
19
RMM_00042
8
Instructions for a correct installation
To guarantee a good functioning of the device all the instructions contained in this manual
must be respected. If the installation does not follow the instructions below, Tattile declines all
responsibility for anomalous behaviours of the device:
Always observe the polarities of the power supplies and the power requirements
specified in this manual.
Always observe the polarities of the input/output signals and their electrical
characteristics.
Mount the equipment on a mechanically stable structure.
Remove the power supply voltage from the camera before unplugging the power
connector.
Turn off all electrical power before making or breaking any electrical connections to
avoid damaging the device.
Use a power supplier with SELV output.
The camera shall be reachable only by maintenance operator.
9
Warranty
The warranty covering the product is invalid if:
The device has been opened or disassembled.
The label is removed and the serial number cannot be read.
Incorrect connection of the power supply and/or the input-output circuitry damaged the
device.
The indications written in the previous paragraph were not respected and this led to
damages.
Damages occurred during the delivery or after an incorrect storage.
These conditions apply to all the equipment supplied with the system.
