Tatsu Baiosphere ML-01, Руководство пользователя, Страница: 6 / 13

THREE
Now we come
to the most
important part -
The design of your
Baiosphere.
First, fill the Baiosphere
2-3 cm with the expanded
clay balls.
This layer is particularly
important to prevent
waterlogging. Besides you
can check the water level
through it.
The Drainage
>1
Next, fill the respective
soil mixture into the
Baiosphere so that a slope
is formed. This way, the
design can be viewed a lot
better later.
Fill in Soil
Dig small holes where the
plants should grow and
plant them carefully.
Then cover the root ball
with soil. You should rather
place larger plants in the
background and smaller
plants in the foreground of
your creation.
Depending on what’s
easiest for you, put your
hardscape into the Baio-
sphere either before or
after planting.
Insert Plants and
Hardscape
Certainly, the glass has
become very dirty after
planting. Adjust your spray
bottle to the hard jet and
rinse off the dirt, then
leave the Baiosphere open
for a few hours.
Be thrifty with the water
at the desert oasis.
Water and Clean
>2
>3
>4
Wow... And once
again a new biotope
sees the light of the
Baiosphere.
We always become
quite sentimental.
Send us photos of your
creation to:
mycreation@baiosphere.de
or tag us on Instagram with
@baiosphere.
Now, just put the silicone
ring and the lamp on top
of the glass. Plug the lamp
into the power socket and
your customized
Baiosphere is ready!
Almost there
>5
2-3 cm
2 – planting
09 – 21 08 – 21