User Installation Guide
r1.3-10/3/14
IsoFlo™ and ContraFlo™
7510 Montevideo Road
© 2014 Tate Access Floors, Inc.
Jessup, MD 20794
Tel (410)799-4200
3 of 18
INTRODUCTION
Thank you for choosing a Tate Airflow product. Tate Airflow products are engineered to maximize the
efficiency of your data center raised floor air handling system. We would be interested in hearing any
comments you may have on this installation manual, product, or overall experience. Please call or e-mail our
Technical Service Department:
Phone: 410-799-4200
E-mail: [email protected]
SAFETY WARNINGS AND CAUTIONS
General
o
This document is subject to change without prior notification. No guarantees are given for the
accuracy of the information contained herein. The information is in particular not to be
understood to imply warranted qualities in any product.
o
Wear personal protective equipment (PPE) as applicable during installation. PPE may include
gloves, safety eyeglasses, hardhats, or additional equipment depending on exact job site
conditions.
o
Do not leave the site unattended until the installation is complete.
Target group
o
This document is aimed at persons entrusted with the installation of IT racks and rack products.
Installation work must only be performed by trained persons. Tate assumes that you possess
the necessary qualifications to perform installation work and that you are aware of the hazards
which may arise when working with racks and rack products.
Safety notes
ATTENTION: IMMEDIATE DANGER TO LIFE AND LIMB IS POSSIBLE IF
PROPER SAFETY IS NOT OBSERVED.
Unpacking and moving
ATTENTION: THE RACK IS TOP-HEAVY AND CAN TILT OVER. AT LEAST TWO
PERSONS ARE REQUIRED WHEN MOVING OR UNPACKING THE RACK.
o
Failure to observe this rule may lead to serious injuries and/or material damage.
Operating environment:
