TATA Motors NEXON EV, Руководство пользователя

Страница: 152 / 232

144
Reverse
Reverse gear can be engaged only when
vehicle is stationary
and brake pedal
pressed. An audio signal indicates when
reverse gear is engaged. will be indi-
cated in instrument cluster.
STARTING AND STOPPING (PEPS)
Motor Passive Start/stop
Start/Stop button is provided on the dash-
board towards the left side of steering
wheel.
Start / Stop Button
A Start/Stop button or Push to Start Button
is a main component of PEPS system. It
is used to control ACC, IGN outputs as
well as to start and stop the motor.
Backup Start
If smart key battery voltage is low or empty
and vehicle is in OFF mode then to start
the vehicle user needs to press start/stop
button two times with interval of 2.5 sec-
onds between two presses after pressing
the brake pedal with valid smart key near
WARNING
Always make sure to keep the gear •
shift knob in the “N” position ignition
is ON and vehicle is stationary.
Do not shift the rotary knob in “N” •
position, even momentarily, when
the vehicle is in motion.
NOTE
If Smart key is inside the vehicle •
and on pressing start stop switch, if
start stop switch green LED blink for
10 seconds then rotate steering
wheel and simultaneously press
start/stop button again.
If smart key is inside the vehicle and •
on pressing start stop switch, if
start/stop button green LED blinks
more than 10 seconds, then contact
authorized TATA MOTORS EV
dealer.
If ESCL (Electronic Steering Col- •
umn Lock) is not unlocked properly,
then vehicle doesn’t go into ACC
mode.
STARTING AND DRIVING