TATA Motors Bolt, Руководство пользователя, Страница: 94 / 162

94
FLAT TYRE REPLACEMENT
07
EMERGENCY & BREAK DOWN ASSISTANCE
REMOVAL OF WHEEL CAP (if fitted):
Insert a piece of cloth between the
spokes of the wheel cover and pull
cover outward.
Take out detached wheel cover from
the wheel rim. For installation, first
match the slot at the wheel cover with
the air filling nozzle of the wheel.
Apply equal pressure at the circum-
ference of the wheel cover to fix it in
the wheel rim.
CHANGING FLAT TYRE:
•
Take out wheel cover (if fitted).
•
Slacken but do not remove the
wheel nuts using wheel spanner
before raising the vehicle.
•
Set the jack properly at correct
jacking point as shown for front or
rear wheel. The jacking points are
indicated on the vehicle ( Refer
jacking point location ). Slowly lift
the vehicle with the help of a jack
handle.
•
Snow chains cannot be used on
the temporary spare wheel.
•
Never use more than one tempo-
rary spare wheel.
•
Do not drive through an automatic
car wash.
•
Never use a temporary spare tyre
if it is damaged or worn down to
the tread wear indicators.
•
The ground clearance of your
vehicle may be reduced. Take care
while parking.
•
The temporary spare should not
be installed on the front axle if the
vehicle must be driven in snow or
on ice.
•
Do not tow whilst the temporary
spare wheel is installed
NOTE
Your vehicle may exhibit some
unusual driving characteristics when
fitted with temporary spare wheel