TATA Motors Altroz 2020, Руководство пользователя

Страница: 147 / 226

STARTING AND DRIVING
136
Park assist indications
In case reverse park assist system mal-
functions, the following message may
appear on the infotainment screen.
Reason for this fault may be
a.
Park Assist Controller / Body Control
Module Failure"
b.
Sensor Malfunction
c.
Partner components such as Info-
tainment music system, Instrument
Cluster failure.
Reverse park assist limitations
Reverse Park Assist system is not a colli-
sion avoiding system. It is solely the
driver’s responsibility to park the vehicle
safely.
Reverse Park Assist feature works on ul-
tra sound echo technology, due to which
performance is not guaranteed in follow-
ing scenarios:

If the object has a sharp edge sur-
face, where surface may divert ech-
oes from sensor reception.

If object is mesh fence made up of
thin wires, where echoes can’t be
given by the surface.

Fast moving objects passes in the
sensor
’s field of detection, where
echoes are not processed by the sys-
tem.

If object is made/covered by foam or
sponge or snow where ultrasonic
sound signals are absorbed.

Objects close to the rear bumper can
go undetected by the Reverse Park
Assist ’s field of detection. Driver
should use extreme caution while
parking the vehicle.

If height of the bumper is changed
due to alteration to the suspension
or other causes

If the sensor areas are extremely hot
from direct sunlight or cold due to
freezing weather.

If Sensors are covered by a hand,
sticker, accessory, etc.

If ultrasonic noise is present around
Vehicle due to other vehicle sensors,
horn, engine, air braking system
(large vehicles), Exhaust Fans, Wire-
less transmitters or mobile phones

If the vehicle speed exceeds
10
kmph, the system will not warn
you even though objects are de-
tected, error message 'Vehicle
Speed is high, drive slowly!' will ap-
pear.

Driving on uneven road surfaces e.g.
Gravel, unpaved roads, Artificial
Speed Breakers, or gradient.