T.Bridge 4WIRE
Deployment Guide
REV-2206.14/0522
Page 17 of 24
Parameter
Required
Description
If omitted, the relay is not used (even if the hardware is
connected).
RelayChannel
No
Relay channel ID.
Only applicable if
UseRelay
is set to
true
.
RelayInvertSwitch
No
•
0
- default behavior;
•
1
- invert the answer to relay signal.
Only applicable if
UseRelay
is set to
true
.
Audio input device
InputDeviceID
is the unique identifier of the audio device (audio-in jack) which receives sound from
the radio. If you are using the default recording device, provide the empty string (
""
).
If you want to use an alternative device, provide its ID:
1.
Open Sound from Windows Control Panel.
2.
Switch to Recording tab.
3.
Double-click the device to which you have connected the analog audio output from the radio
(3.5mm audio jack).
4.
Click Properties button.
5.
Switch to Details tab.
6.
Select Children from Property list.
7.
Right-click the value which contains
{0.0.1.00000000}.
and click Copy in the context menu.
8.
Paste the value in
InputDeviceID
property and remove the part before the first curly brace (
{
).
Audio output device
OutputDeviceID
is the unique identifier of the audio device (audio-out jack) which transmits sound
from TASSTA network to the radio. If you are using the default playback device, provide the empty
string (
""
).
If you want to use an alternative device, provide its ID:
1.
Open Sound from Windows Control Panel.
2.
Switch to Playback tab.
3.
Double-click the device to which you have connected the analog audio input from the radio (3.5mm
audio jack).
