Tasman 1200 Series Скачать руководство пользователя

Страница: 45 / 50

Installation Guide: 1200-7000 Series Routers

TiOS version 8.0

Figure 26 Connecting T1 WAN Cables

CT3 WAN Interface

The front panels on the Tasman 6300 and 7030 system provide a port for connecting to a
Channelized T3 (CT3) WAN interface. The 6302 provides two CT3 interface ports.

NOTE:

Two RG-59 coaxial cables with BNC connectors are used to complete this connection. One cable

is used to transmit data. The other cable is used to receive data.

To connect to a CT3 interface:

Connect the BNC connectors on one end of two cables to the service provider equipment.

Insert the BNC connector in the port and then rotate the connector barrel clockwise until it locks
(approximately 1/4 turn).

Connect the BNC connectors on the other ends of the two cables to the Channelized T3 WAN
interface on the front panel of the Tasman system.

Make sure that one cable is only connected to the transmit ports, and the other cable is only
connected to the receive ports.

Figure 27 Connecting Channelized T3 WAN Cables

Clear Channel T3 WAN Interface

The front panel on the Tasman 7030 system provides connection ports for a Clear Channel T3 WAN
interface.

NOTE:

Two RG-59 coaxial cables with BNC connectors are used to complete this connection. One cable

is used to transmit data. The other cable is used to receive data.

To connect to a Clear Channel T3 interface:

Connect the BNC connectors on one end of two cables to the service provider equipment.

Insert the BNC connector in the port and then rotate the connector barrel clockwise until it locks
(approximately 1/4 turn).

Connect the BNC connectors on the other ends of the two cables to the Clear Channel T3 WAN
interface on the front panel of the Tasman system.

Status

Mon.

Содержание 1200 Series



















































Результаты поиска

Содержание 1200 Series

Отзывы:

Похожие инструкции для 1200 Series

Бренды по названию

Популярные бренды

Tasman 1200 Series, Руководство по установке

Результаты поиска

Содержание 1200 Series

Отзывы:

Похожие инструкции для 1200 Series

Бренды по названию

Популярные бренды