Page 15 of 25
ALTITUDE ADJUSTMENT
All valves have been pre-set and certified for installation at elevations from 0
2000 feet (1
610 m)
above sea level.
When installing this unit at higher elevations, it is necessary to decrease the input rating by replacing
the existing burner orifice with a smaller size for installations over 2000 feet (610 m). The appliances
input should be reduced 4% for each additional 1000 feet (305m) above sea level. For the USA, de-
rate the unit from sea level according to the gas installation code.
FIELD ASSEMBLED PARTS
Your outdoor fireplace comes fully assembled, to finish assembling the unit you must do the following:
1. Install the logs.
2. Install the lava rock on the burner.
3. Connect the gas supply.
CERAMIC LOG INSTALLATION PAN BURNER
The burner pan has 5 pins for positioning the log placement. Please follow instructions carefully and
accurately as this will prevent soot buildup on the logs.
f i r e - p a r t s . c o m
