TASKING iSYSTEM ST SPC58, Руководство пользователя по оборудованию

Страница: 4 / 34

Introduction
ST SPC58 (Chorus) H Line Emulation Adapter primary use case is providing Nexus trace func-
tionality for the SPC58 H Line devices in the:
·
144-pin
·
176-pin
·
302-pin
where Nexus trace port is not available.
The Emulation Adapter might differ in some peripherals from the target device; there-
fore, the device datasheet should be checked.
Alternative use case is a Standalone operation , where you can start developing and testing the
application while his target may not be available yet.
ST SPC58 H Line Emulation Adapter is based on the "superset" SPC58NH92C5 device in the
BGA386 package on which the Nexus trace port is also exposed and available (P1 connector).
It’s a "superset" device with 10MB program flash and can emulate all ST SPC58 H Line devices
in smaller packages.
Complete Emulation Adapter is split into individual parts which makes it flexible when support
for different target packages is required. A typical setup in conjunction with the target contains:
·
IEA-SPC58NH (Microcontroller part)
·
Conversion board
·
Solder part
More information about our products on www.isystem.com or via sales@isystem.com .