36
Beginning work with the machine
Ground sensor detection
Operating Modes
Use the emergency stop
Replenishing cleaning solvent
Attention:
Always wear slip-resistant shoes and ap
-
propriate working clothes when working
with this device!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Attention:
If there is a danger of falling objects during
use of the machine, the necessary safety
precautions must be taken or adhered to in
accordance with national regulations.
Notice:
When working in public buildings, the
warning light must be switched on.
Notice:
Please keep both hands on the driving
handles when operating the machine in
“Manual mode” in order to ensure safe op
-
eration.
Attention:
Before beginning work (in the work posi
-
tion), check whether your field of vision is
sufficient to ensure safe working.
An insufficient field of vision can make
work difficult and therefore impair safety
for the operator, machine and third parties.
• Check whether the emergency stop button is released.
• Switch on the machine (main switch button).
It takes approximately 2 minutes for the machine to fully
power up.
Attention:
This machine is equipped with ground
sensors for detection of obstacles and un
-
even ground, such as stairs. A message is
shown on the display.
The machine must be displaced manually
by pressing the emergency stop!
Incorrect handling can lead to personal in
-
jury and damage to the machine.
• Manual mode:
Allows you to control all cleaning functions including speed
• Automatic mode:
Allows you to let go while the machine cleans the area au
-
tomatically
Notice:
Make sure the area to be cleaned is as
clutter free as possible by removing all
items from the area such as garbage bags,
trashcans and cleaning carts.
Notice:
Clear the ground prior to using the ma
-
chine because diverse small parts can get
caught in the hose and could result in the
suction system becoming blocked, which
would mean that the optimal suction result
can no longer be guaranteed.
Notice:
When the emergency stop is activated, the
machine needs to be subsequently reset.
To reset the machine, the reset button
(please see the structural layout on page
31), must be pressed.
Attention:
The ground surface may be damaged
when working without cleaning solution.
Notice:
A rattling sound of the pump indicates that
the fresh water tank is empty.
Attention:
The pump must never run dry for an ex
-
tended period.
Notice:
A sensor in the fresh water tank deter
-
mines whether there is sufficient cleaning
solution present.
When the fresh water tank is empty, this is
shown on the display and the machine
stops automatically, both in automatic as
well as manual mode.
• Switch off the machine.
• Fill the fresh water tank.
