72
Removing and cleaning the brush
Cleaning the machine
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec
-
cable operation and a long service life.
Notice:
Clean the brush whenever cleaning work
is completed.
• The machine must be switched off.
• To lift the tool, push the foot pedal
downwards until it engages.
• Rotate the tool counterclockwise
away from the tool connection using
your foot.
• Clean the tool under running water.
Attention:
Never clean the machine with a high-pres
-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Notice:
The machine must be switched off and the
key must be removed.
Notice:
Store the machine with a lifted squeegee,
lifted brush and open tank lid. Thus, the
tank can dry,
and the generation of mold and unpleas
-
ant odors is prevented.
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex
-
pire.
Attention:
In order to rule out unintended machine
functions, before starting maintenance
works the following must always be carried
out
- the machine must be switched off,
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
◊
◊◊
◊◊◊
⊗
Page
Loading batteries
●
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
●
Draining and cleaning the recovery and
fresh water tank (Flextank)
●
Clean all yellow marked parts
●
Clean the brushes
●
Clean the squeegee, check the blades
for wear and change them, if necessary ●
Wipe the machine using a damp cloth
●
Clean the seals of the tank lid, check
them for cracks and replace them, if
necessary
●
Maintenance and service program car
-
ried out by Diversey service techni
-
cians
●