17
I25
I24
I23
I22
I21
I20
I19
I18
I17
I16
I15
tr
sl
p
t
p
l
n
o
n
l
it
fr
fi
es
en
d
e
d
a
cz
Storage / parking of machine (machine is idle)
Never store the machine with the tank cap closed.
This allows the tank to dry out. As a result, the formation of mould and
unpleasant smells can be reduced.
Service, maintenance and care
Maintenance of the machine is a pre-condition for trouble-free running and an
extended service life.
Service intervals
TASKI machines are built to the highest quality standards. This is supported by
internationally recognised quality control procedures. Electrical and mechanical
parts are subject to wear or aging if used for long periods of time.
Service centre
Should you contact us due to a malfunction or for placing an order, please
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the
address of your nearest TASKI partner can be found on the last page of this
manual.
Malfunctions
Technical data
Accessories
Transport
Ensure that the unit is securely fastened within the transportation vehicle.
Disposal
When it has reached the end of its operational life, the machine and its
accessories must be disposed of according to the national regulations. Your
TASKI partner can assist you with the proper disposal on request.
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
◊
= After use,
◊◊
= Every week,
◊◊◊
= Every month,
⊗
= Service light
Activity
◊ ◊◊ ◊◊◊ ⊗
page
Drain and clean the tank
16
Clean the filter and sinter bushing
16
Wipe down the machine with a damp cloth
16
• In order to maintain operational reliability and availability for use, a service
must be carried out after 250 working hours or at least once a year.
Shorter intervals may be necessary
u
nder rough or extreme working
conditions and/or insufficient maintenance.
Malfunction
Possible causes
Troubleshooting
page
Machine does not
run
Not turned on
• Turn on
16
Power supply cord not
properly plugged into
the mains socket
• Check
Power supply cord not
properly plugged into
ergodisc
• Check
Power supply cord
defect
• Call for technical
assistence
Dosing control unit
defect
• Call for technical
assistence
Motor does not turn
• Call for technical
assistence
No foam released
Tank is empty
• Check the tank, and
refill if necessary
15
Tank cap not sealed
properly
• Check
Filter blocked
• Clean filter
16
Sinter bushing
blocked
• Clean sinter bushing
16
Name/model
FG 2
FG 2C
Rated voltage
230-240V
120V
ac
Frequency
50
60
Hz
Rated power
120
110
W
Assessed sound level LPA according
to EN 60704-1
62
62
dB(A)
Splash water protection
IPX4
IPX4
Electrical protection class
II
II
Article
FG 2
8505010
Hand shampooing set
X
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
