Taski aquamat 20 Скачать руководство пользователя страница 5

20

Stair transportation

End of operation

After brushing, the carpets should not be walked on again until they are 
completely dry. Wherever possible, only replace the furniture when the carpet 
is completely dry again. If this is not possible, protect the feet of the furniture 
with aluminium foil (danger of rusting and staining).
Loosen the locking button for the recovery tank and remove the recovery tank.

Service, maintenance and care

The machine's maintenance is a pre-condition for trouble-free running and a 
long life.

Service intervals

TASKI machines are built to the highest quality standards. This is supported by 
internationally recognised quality control procedures. Electrical and mechanical 
parts are subject to wear or aging if used for long periods of time.

Service centre

Should you contact us due to a malfunction or for placing an order, please 
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the 
address of your nearest TASKI partner can be found on the last page of this 
manual.

Malfunctions

Transport

The machine may only be transported after it has been emptied and is in a cold 
state, normally in the standing position and sufficiently secured. The fitted 
accessories must all be removed beforehand.

Disposal

When they are no longer serviceable, the machine and its accessories must be 
disposed of in a professional manner in accordance with the national 
regulations. Your TASKI partner can help you here on request.

Caution:

The tank must be emptied before transporting over stairs!

Caution:

The fitted accessories must all be removed before transporting 
over stairs!

Upwards:

Moving with the back of the machine to the stairs and with the 
assistance of the running wheels, pull the machine upwards 
step-by-step.

Dowwards:

Place the machine facing forward at the edge of the stairs and 
slowly allow the machine to roll downwards step-by-step.

Caution:

Due to the weight of the machine, there are risks involved in such 
transportation!

Slipping can result in damage to the machine and injuries to 

persons.

Carefully clean the recovery tank with clean, warm water.
For draining, pull the corresponding hose out of its holder and 
drain into the floor drain or a bucket.

Caution:

Only TASKI branded spare parts must be used, otherwise 
warranties and liabilities will be omitted!

Symbols:

 = after use, 

◊◊

 = every week, 

◊◊◊

 = every month

Activity

◊ ◊◊ ◊◊◊

page

Drain and clean the foam solution tank

20

Clean the push-in filter with the closing cover for the 

solution tank.

20

Check the suction foot and remove any soiling.

20

Check the function of the float and the dirt sieve, and 

clean where necessary.

20

Wipe down the machine with a damp cloth

20

• In order to maintain operational reliability and availability for use, the service 

must be carried out after 500 working hours or at least once a year.

S

horter intervals may be necessary

 u

nder rough or extreme working 

conditions and/or in case of insufficient maintenance.

Malfunction

Possible causes

Troubleshooting

page

Machine does not 

run

Main switch switched 

off

• Switch on the main 

switch

19

No power supply

• Plug the power supply 

cord into the mains 

socket

Power cord defect

• Call for technical 

assistence

No suction

Main switch switched 

off

• Switch on the main 

switch

19

Motor protection 

switch has been 

tripped

• Reset the trip fuse

Motor defective

• Call for technical 

assistance

Poor suction

Dirt in the suction foot • Clean

Cover not correctly 

fitted

• Reposition

19

Seal defective or not 

present

• Replace where 

necessary

Suction hose torn or 

connection socket 

loose

• Replace or secure as 

required

19

Recovery tank full/

float has been 

activated

• Switch off the suction 

motor, and empty and 

clean the tank

Vent opening / filter 

blocked

• Empty tank, then clean 

the vent opening / filter

Little or no water

Pump switched off

• Turn on

Spray nozzles 

blocked

• Dismount and clean

Spray nozzles dis-

mounted

• Remount or replace

Fresh water filter 

blocked

• Empty the solution 

tank, clean the tank 

and the filter.

Отзывы: