Task Force Tips ThunderFog Series, Руководство пользователя

Страница: 5 / 20

©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20
5
3.0 GENERAL INFORMATION
This manual describes nozzles calibrated at 100 psi (7 bar) and 75 psi (5 bar). Contact the factory for data speci fi c to models
that operate with metric fl ow calibrations. ThunderFog, QuadraFog, and QuadraCup are economical, lightweight, and dependable
nozzles. Their rugged construction is compatible with the use of fresh water as well as fi re fi ghting foam solutions. Other important
operating features include:
• Quick-acting pattern control from straight stream to wide fog
• Fixed fog teeth
• Metal spinning fog teeth available on some models
• Easily
fl ushable while fl owing to clear trapped debris
• Quick-change rear valve seat
• TFT’s 5-year warranty and unsurpassed customer service
3.1 VARIOUS MODELS AND TERMS
The nozzle is available in several di ff erent models and inlet connections. Basic body styles are shown below.
Selectable Flow : A nozzle with a discharge ori fi ce that can be set to a user selected position. In each position the nozzle acts as a
fi xed ori fi ce nozzle.
Tip Only: A nozzle without an integral ball shutto ff valve.
ThunderFog, QuadraFog, and QuadraCup nozzles are available in a variety of fl ow ranges and con fi gurations. All models deliver the
selected fl ow when the rated pressure is supplied to the nozzle. Flow settings and recommended hose sizes are:
SERIES RECOMMENDED
HOSE SIZE
FLOW SETTINGS
@100 PSI (7bar)
NOZZLE TYPE
INCHES MM GPM l/min
1” QUADRAFOG 3/4, 1 19, 25 5, 10, 24, 40 20, 40, 100, 150 Selectable Flow
1” QUADRAFOG 3/4, 1 19, 25 5, 10, 25, 40, 60 20, 40, 100, 150, 230 Selectable Flow
1.5” QUADRAFOG 1-1/2 38 30, 60, 95, 125 115, 230, 360, 475 Selectable Flow
1.5” QUADRACUP 1-1/2 38 30, 60, 95, 125 115, 230, 360, 475 Selectable Flow, Foam
1.5” THUNDERFOG 1-1/2 to 1-3/4 38 to 45 30, 60, 95, 125, 150, 200 115, 230, 360, 475, 550, 750 Selectable Flow
2.5” THUNDERFOG 1-1/2 to 2-1/2 38 to 64 95, 125, 150, 200, 250 360, 475, 550, 750, 1000 Selectable Flow
* Other threads, coupling sizes, or connector styles can be speci fi ed at time of order.
ThunderFog, QuadraFog, and QuadraCup nozzles are available in several models.
Table 3.1
HUNDER
T F
OG
Coupling
Shaper
HUNDER
T F
OG
Ball Valve Handle
Model Number
Serial Number
Operating Pressure
ON OFF
A) TIP ONLY
Figure 3.1A
B) BALL VALVE
Figure 3.1B