©Copyright Task Force Tips LLC 2004-2020
17
LIY-200 November 5, 2020 Rev19
4.5 CABLE ROUTING FOR EXTEND-A-GUN
Monsoon monitor for use with Extend-A-Gun RC comes with the wire installed in a nylon tube. The nylon tubing gives the wire additional
stiffness so it better follows as the Extend-A-Gun RC extends or retracts. Use the provided wire clamp to secure the wire and tubing to
the Extend-A-Gun gearbox.
Figure 4.5
Extend-A-Gun Cable Routing
The Extend-A-Gun manual override knob may be mounted in any of four possible orientations (90 degrees apart) relative to the Straight
Ahead Reference Mark on the monitor.
WIRE WRAPPED
CORRECT
WIRE NOT WRAPPED
INCORRECT
NOTE:
WIRE NOT
WRAPPED
MANUAL OVERRIDE
KNOB ON
EXTEND-A-GUN
NOTE:
CORRECT
WIRE WRAP