Task Force Tips MONSOON RC MONITOR Скачать руководство пользователя страница 32

Страница: 32 / 32

©Copyright Task Force Tips LLC 2004-2020

LIY-200 November 5, 2020 Rev19

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

10.0 OPERATION AND INSPECTION CHECKLIST

BEFORE EACH USE,

appliances must be inspected to this checklist:

1. All valves (if so equipped) open and close fully and smoothly

2. Waterway is clear of obstructions

3. There is no damage to any thread or other connection

4. All locks and hold-down devices work properly

5. The pressure setting on the relief valve (if so equipped) is set correctly

6. Gaskets are in good repair

7. There is no obvious damage such as missing, broken or loose parts

8. There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, or other defects)

9. All swiveling elements rotate freely

10. Nozzle is securely attached

BEFORE BEING PLACED BACK IN SERVICE,

appliances must be inspected to this checklist:

1. All valves (if so equipped) open and close smoothly and fully

2. The waterway is clear of obstructions

3. There is no damage to any thread or other type connection

4. The pressure setting of the relief valve, if any, is set correctly

5. All locks and hold-down devices work properly

6. Internal gaskets are in accordance with NFPA 1962

7. There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, or other defects)

8. All swiveling connections rotate freely

9. There are no missing parts or components

10. The marking for maximum operating pressure is visible

11. There are no missing, broken, or worn lugs on couplings

NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of fire hose, couplings, nozzles and fire hose appliances. Quincy, MA: National Fire

Protection Agency

WARNING

Equipment failing any part of the checklist is unsafe for use and must have the problem corrected

before use or being placed back into service. Operating equipment that has failed the checklist is a

misuse of this equipment.

Содержание MONSOON RC MONITOR

































Результаты поиска

Содержание MONSOON RC MONITOR

Отзывы:

Похожие инструкции для MONSOON RC MONITOR

Бренды по названию

Популярные бренды

Task Force Tips MONSOON RC MONITOR, Инструкции по установке, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание MONSOON RC MONITOR

Отзывы:

Похожие инструкции для MONSOON RC MONITOR

Бренды по названию

Популярные бренды