Task Force Tips Masterstream Series Скачать руководство пользователя

Страница: 24 / 24

©Copyright Task Force Tips LLC 1999-2020

LIM-030 November 16, 2020 Rev15

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

10.0 OPERATION AND INSPECTION CHECKLIST

BEFORE EACH USE,

the nozzle must be inspected to this checklist:

1. There is no obvious damage such as missing, broken or loose parts, damaged labels etc.

2. Waterway is clear of obstructions

3. Coupling is tight and leak free

4. Nozzle flow is adequate as indicated by pump pressure and nozzle reaction

5. Shaper turns freely and adjusts pattern through full range

6. Shaper detent (if so equipped) operates smoothly and positively.

BEFORE BEING PLACED BACK IN SERVICE,

nozzles must be inspected to this checklist:

1. All controls and adjustments are operational

2. There are no broken or missing parts

3. There is no damage to the nozzle that could impair safe operation (e.g. dents, cracks, corrosion or other defects)

4. The thread gasket is in good condition

5. The waterway is clear of obstructions

6. Nozzle is clean and markings are legible

7. Coupling is retightened properly

8. Shaper is set to desired pattern

WARNING

Equipment failing any part of the checklist is unsafe for use and must have the problem corrected

before use or being placed back into service. Operating equipment that has failed the checklist is a

misuse of this equipment.

Содержание Masterstream Series

























Результаты поиска

Содержание Masterstream Series

Отзывы:

Похожие инструкции для Masterstream Series

Бренды по названию

Популярные бренды

Task Force Tips Masterstream Series, Инструкции по установке, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Masterstream Series

Отзывы:

Похожие инструкции для Masterstream Series

Бренды по названию

Популярные бренды