Task Force Tips Masterstream 4000 ER Automatic Скачать руководство пользователя страница 1

Страница: 1 / 12

©Copyright Task Force Tips LLC 2020

LIM-032 November 30, 2020 Rev01

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

G-Force

INSTRUCTION FOR SAFE OPERATION AND MAINTENANCE

Masterstream 4000 ER

Automatic and Selectable Nozzles

WARNING

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial-

number.
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel.

SELECTABLE

2000, 3000, 4000 GPM @ 100 PSI

(7500, 11,000, 15,000 LPM @ 7 BAR)

AUTOMATIC

600 - 4000 GPM @ 80-120 PSI

(2350 - 15,000 LPM @ 5.5-8.3 BAR)

Содержание Masterstream 4000 ER Automatic













Результаты поиска

Содержание Masterstream 4000 ER Automatic

Отзывы:

Похожие инструкции для Masterstream 4000 ER Automatic

Бренды по названию

Популярные бренды

Task Force Tips Masterstream 4000 ER Automatic, Инструкции по безопасной эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Masterstream 4000 ER Automatic

Отзывы:

Похожие инструкции для Masterstream 4000 ER Automatic

Бренды по названию

Популярные бренды