manualshive.com logo in svg

Task Force Tips MASTERSTREAM 1250S, Инструкции по установке, безопасной эксплуатации и обслуживанию

Поделиться
Скачать
Task Force Tips MASTERSTREAM 1250S Скачать руководство пользователя страница 3

©Copyright Task Force Tips, Inc. 1999 - 2011 

LIM-030 April 29, 2011 Rev13

3

1.0 MEANING OF SAFETY SIGNAL WORDS

A safety related message is identifi ed by a safety alert symbol and a signal word to indicate the level of risk involved with a particular 
hazard. Per ANSI standard Z535.4-2007, the defi nitions of the four signal words are as follows:

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious 
injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious 
injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor 
or moderate injury.

NOTICE

NOTICE is used to address practices not related to personal injury.

2.0  GENERAL INFORMATION

The Task Force Tips Masterstream Series Nozzles automatic nozzles operate by sensing the pressure at the nozzle’s inlet and 
adjusting the discharge opening to maintain a constant pressure throughout the fl ow range of the nozzle. While fl owing, the stream 
pattern can be varied from wide fog to straight stream. Trapped debris can be removed without the use of tools.

The Task Force Tips Masterstream Series nozzles are deluge nozzles with clean, far reaching straight stream capability. They are 
adjustable from straight stream to a dense fog pattern.

These nozzles are constructed of hardcoat anodized aluminum and UV resistant rubber. Their rugged construction is compatible 
with the use of fresh water as well as fi refi ghting foam solutions. A summary of each nozzle’s characteristics is shown in the table 
below.

AUTOMATIC SERIES

FLOW RANGE

NOMINAL PRESSURE

STANDARD COUPLING

GPM

L/min

PSI

BAR, 

KPA/100

MASTERSTREAM 1000

150-1000

600-4000

100

7

2.5” NH FEMALE

MASTERSTREAM 1250S

150-1250

600-4500

100

7

2.5” NH FEMALE

MASTERSTREAM 1250

300-1250

1100-4700

70-120

4.8-8.3

2.5” NH FEMALE or

3.5” NH FEMALE

MASTERSTREAM 1500

300-1500

1100-5700

70-120

4.8-8.3

2.5” NH FEMALE or

3.5” NH FEMALE

MASTERSTREAM 2000

300-2000

1100-7600

80-120

5.5-8.3

3.5” NH FEMALE

MASTERSTREAM 4000

600-4000

2350-15000

80-120

5.5-8.3

6.0” ANSI 150 FLANGE

FIXED/SELECTABLE 

SERIES

FLOW

PRESSURE

K 

FACTOR

STANDARD 

COUPLING

GPM

LPM

PSI

BAR, KPA/100

MASTERSTREAM 

1000 FIXED

CUSTOMER 

SPECIFIED; 

1000 GPM 

MAX

CUSTOMER 

SPECIFIED; 

4000 LPM MAX

CUSTOMER 

SPECIFIED; 

150 PSI MAX

CUSTOMER 

SPECIFIED; 10 

BAR MAX

50-100

2.5" NH 

FEMALE

MASTERSTREAM 

1000 SELECTABLE

250, 350, 500, 

750, 1000

1000, 1500, 
2000, 3000, 

4000

100

7

15-75

2.5" NH 

FEMALE

MASTERSTREAM 

1000 SELECTABLE

300, 500, 700 

,1000, 1250

1200, 1800, 
2400, 3600, 

4800

150

10

50-105

2.5" NH 

FEMALE

NOTES ON ABOVE TABLE

•  Other threads, coupling sizes or connector styles can be specifi ed at time of order.
•  Masterstream1250, 1500,  2000 and 4000 nozzles are fi eld adjustable within the range of pressures shown.
•  For long term installations, it is recommended that the threads be greased before installing the nozzle.

Содержание MASTERSTREAM 1250S





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды