Task Force Tips FM Series Скачать руководство пользователя страница 12

2800 East Evans Avenue • Valparaiso , IN 46383-6940

800-348-2686 • 219-462-6161 • Fax 219-464-7155

TASK FORCE TIPS, Inc.

Nozzle must be inspected before each use for proper operation and function according

to this checklist. Check that:

1)
2)
3)
4)
5)
6)

There is no obvious damage such as missing, broken or loose parts, damaged labels, etc.
Coupling is tight and leak free
Valve handle moves freely though full range and shuts off flow
Nozzle flow is adequate as indicated by pump pressure and nozzle reaction

Nozzle moves smoothly in and out of flush position

Shaper turns freely and adjusts pattern through full range

Any nozzle failing any part of the inspection checklist is unsafe and must have the

problem corrected before use. Operating a nozzle that fails any of the above inspections

is a misuse of this equipment.

11.0 INSPECTION CHECKLIST

WARNING

Task Force Tips, Inc., 2800 East Evans Avenue, Valparaiso, Indiana 46383 ("TFT") warrants to the original purchaser of its

Ultimatic, Mid-Matic, and Handline series nozzles ("equipment"), and to anyone to whom it is transferred, that the

equipment shall be free from defects in material and workmanship during the five (5) year period from the date of

purchase.
TFT's obligation under this warranty is specifically limited to replacing or repairing the equipment (or its parts) which are

shown by TFT's examination to be in a defective condition attributable to TFT. To qualify for this limited warranty, the

claimant must return the equipment to TFT, at 2800 East Evans Avenue, Valparaiso, Indiana 46383, within a reasonable

time after discovery of the defect. TFT will examine the equipment. If TFT determines that there is a defect attributable to

it, TFT will correct the problem within a reasonable time. If the equipment is covered by this limited warranty, TFT will

assume the expenses of repair.
If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT

may elect to refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its

obligations under this limited warranty. If TFT makes this election, claimant shall return the equipment to TFT free and

clear of any liens and encumbrances.
This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person

who is an intended or unintended beneficiary of the equipment, shall not be entitled to recover from TFT any

consequential or incidental damages for injury to person and/or property resulting from any defective equipment

manufactured or assembled by TFT. It is agreed and understood that the price stated for the equipment is in part

consideration for limiting TFT's liability. Some states do not allow the exclusion or limitation of incidental or consequential

damages, so the above may not apply to you.
TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including

failure to provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or

altered by someone else.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE

EQUIPMENT ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS

FOR A PARTICULAR PURPOSE. THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT

STATED IN THIS DOCUMENT.

12.0 WARRANTY

LIN-040 April 2, 2002 Rev 0

Содержание FM Series













Отзывы: