Notifications
Operating Mode
Audio
Vibration
Powering on or off
One beep
Once
Recording an event
Two beeps (every
2 minutes)
Twice (every 2
minutes)
Press the battery button
while the camera is recording
Two beeps
Twice
The device is ending an event
and returning to BUFFERING
mode
One long beep
Once, long dura
-
tion
The battery is at 20% capacity
or lower
Four quick beeps
(every 5 minutes)
Four times, quick
-
ly, every 5 minutes
Cable disconnect (the camera
will shut down)
Three beeps
Six times
Camera memory is full (cam
-
era will not record).
Three beeps
Three times
Recharging the Battery and Uploading Data
If you do not have an Axon Dock, upload video with a Windows compatible
computer using Evidence Sync: taser.com/syncdownload.
1
Ensure the controller is off. Insert the camera and controller into the
Axon Dock as shown.
The Axon Dock automatically uploads the data from the camera to Evi
-
dence.com and recharges the controller battery. When a video uploads
successfully to Evidence.com, that video is removed from the camera.
(The camera must be registered to your Evidence.com account.)
2
At the beginning of the next shift,
ensure that your camera (if one
has been assigned to you) dis
-
plays with a green LED before
removing it from the Axon Dock.
Camera Upload Status LED
When you plug your camera into the Axon Dock, the LED on the camera displays the system’s status.
Device Status
Camera LED
Initial connection (momentary)
Solid red (for 20 seconds or fewer)
In queue awaiting upload
Solid yellow
Device ready (all videos uploaded successfully) and fully charged
Solid green
Device not assigned, agency mismatch, camera set in the offline mode,
or device error
Blinking red
Uploading data
Blinking yellow –
DO NOT remove the camera from the Axon Dock
Firmware update, internal battery charging, extremely low battery, or
memory full
Blinking red and yellow –
DO NOT remove the camera from the Axon
Dock
Transfer error, device re-trying to transfer
Blinking green and yellow
Network error (no connection)
Blinking red, yellow, and then green (cycling all colors)
Axon Dock has no communication with the camera. Contact TASER cus
-
tomer service.
LED off
Using Axon View
The Axon View application enables you to replay video and add metadata
(GPS, title, ID, and category) to your videos using a smart phone or multi
-
media player.
1
Using your smart device, download the Axon View ap
-
plication from the Google Play store or the iTunes App
Store. Search Axon View.
2
On your smart device, open the Axon View application
and follow the onscreen instructions.
Note:
All data is stored on the Axon camera. No videos
are stored on your smart device
Pairing an Axon Flex 2 Camera with a Smart Device
Android and Google Play are trademarks of Google, Inc., Bluetooth is a trademark of the Bluetooth SIG, iTunes is a trademark of Apple,
Inc., and IOS is a trademark of Cisco Systems, Inc.
,
AXON, Axon, Axon Dock, Axon Flex 2, TASER, and
©
are trademarks of TASER International, Inc., some of which are registered in the
US and other countries. For more information, visit www.taser.com/legal. All rights reserved. © 2017 TASER International, Inc.
MPC0251 Rev: C
For more information
, see the
Axon Flex 2 System User Manual
,
Axon Dock
Quick Start Guide
,
Axon View for Android Devices User Manual
, or
Axon View
for iOS Devices User Manual
, available at www.taser.com, au.taser.com,
uk.taser.com.
1
With the camera connected to the controller, turn
on the Axon Flex 2 controller.
2
Wait until the Function LED is not lit anymore.
3
Hold down the
Function and
EVENT buttons for
5 seconds.
4
Wait until you hear 4 beeps.
The Function LED on the
controller and the camera
LED will blink green.
5
On your smart device, fol
-
low the onscreen instruc
-
tions.
