a
, TASER 7, and
d
are trademarks of Axon Enterprise, Inc., some of which are registered in the US and other countries. For more information visit www.axon.com/legal. All rights reserved.
© 2022 Axon Enterprise, Inc.
Disconnecting (Disabling the Energy Weapon)
The energy weapon must be armed to be disabled.
If the connection between the disconnect strap and the Disconnect battery
pack is removed, the energy weapon will be disabled in about 1/4 of a sec-
ond. There will be an audible alert in the form of beeping. While the weapon
is disabled, the disconnect icon will flash on the central information display
(CID):
If the energy weapon was discharging when the disconnect strap was
detached, the electrical output will stop. The Arc switch and trigger will
not work.
The disconnect icon will continue flashing on the CID whether the safety is up
or down. To stop the beeping, shift the safety to the down (SAFE) position and
remove the battery pack. Removing the battery pack also turns off the CID.
Until the battery pack is reset, the energy weapon will resume beeping when-
ever the battery pack is inserted in the energy weapon if the safety key is not
attached.
Reset
To reactivate the energy weapon:
1
Reattach the disconnect strap to the battery pack.
2
Put the Disconnect battery pack in a TASER 7 Dock.
Note:
The dock must be running 0.10.10 or later
firmware to be compatible with the Discon
-
nect battery pack.
The battery pack should reset in a few seconds. Do
not remove the battery pack from the dock until
the LED changes to solid green . See the
TASER 7
Dock Quick Reference Guide
or
TASER 7 Dock Individ-
ual Bay/Dataport Quick Start Guide
for information
on dock operation.
3
Remove the battery pack from the dock.
4
Reinsert the battery pack in the energy weapon.
March 2022
MPC0301 Rev: B
5
Shift the safety switch to the up (ARMED) position and confirm there is
no beeping and that the CID is normal.
6
Perform a function test. See the
TASER 7 Energy Weapon User Manual
for
instructions.