6
2. Attach the bender former to the tripod with the fixing bolts.
4.
Usage
1.
Set the copper tube to the former and fasten the hook. Then put the guide
pin through the former and the guide (arrow mark on the guide should be
pointing upwards) completely.
※
The copper tube end should stick out of the hook at least 20mm or more.
※
The guide pin should pass completely through the former plate.
2. Set the ratchet wrench to the former and shift the selector bar as per the
picture below.
※
Can adjust the length of ratchet handle by turning the grip.
※
Do not pull out the handle over the limit line.
(The limit line is shown by the dent on the ratchet tube.)
SELECTOR BAR
UNLOCK
LOCK
HOOK
MORE THAN 20mm
PENETRATE
COMPLETELY
RATCHET HANDLE
ROCK NUT
FIXING BOLT
