2
1. Battery Installation
* Turn off the unit when you replace the battery.
(1) Use a coin to unscrew the battery cover.
(2) Connect the battery cable to the battery and put it in the case.
(3) Close the battery cover and firmly tighten the two screws.
2. Probe Installation and Extension Cord Connection
(1) To install the probe, insert the probe into the unit as in
the right figure. After installation, lightly pull the probe
to check that it will not come off.
(2) To remove the probe, pull out the probe while pushing
the probe stopper.
(3) To install the extension cord, like the probe, connect it
to the unit as in the right figure. To remove it, like the
probe, pull out the cord while pushing the probe
stopper. The probe connection of the extension cord is
also equipped with a probe stopper.
