Tascam US-800, Руководство пользователя

Страница: 21 / 40

TASCAM US-800
21
STATE section (Windows only)
ª
This shows system settings and driver and
firmware versions.
LATENCY
Sets the latency of the USB driver.
Settings: 192, 240, 288, 336, 384, 576
(default value)
NOTE
All applications that connect to the US-800
•
must be closed before the latency can be
changed.
Increase the buffer size if the computer has
•
insufficient processing power and noise
occurs. Increasing the buffer size, however,
also increases latency (audio signal delay).
Set this value to best suit your system.
DRV Ver.
This shows the driver version.
F/W Ver.
That shows the firmware version installed in
the unit.
System setting section (Mac only)
ª
This is the same as the system settings
section on the mixer tab screen.
About latency
ª
This unit’s driver momentarily stores audio
input and output signals in a buffer. The size
of the buffer can be adjusted.
The smaller the buffer is, the shorter the
delay is when monitoring the input audio
signal. Smaller buffers, however, require more
computer processing at high speed. If other
system processes, for example, prevent the
audio processing from being completed in
time, clicking and popping noises, dropouts
and other issues could occur with the audio
signal.
On the other hand, the larger the buffer size,
the more stable operation becomes, making
interference from other system processes less
likely to affect the audio signal. However, the
delay when monitoring the audio signal also
becomes longer.
With this unit, you can adjust the buffer size
according to the capability of your system
and your audio needs.
4 – US-800 control panel settings