Tascam US-224 Скачать руководство пользователя страница 2

 

2

 

Important Safety Precautions 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO 
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 

 

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the literature accompanying the appliance. 

 

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons 

 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

For U.S.A 

This appliance has a serial number located on the 
rear panel. Please record the model number and 
serial number and retain them for your records. 
Model number ______________________ 
Serial number

WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. 

IMPORTANT (for U.K. Customers) 

DO NOT cut off the mains plug from this equipment. 

 

If the plug fitted is not suitable for the power points in your  home or
the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or  consult your dealer. 
 
If nonetheless the mains plug is cut off, remove the fuse and dispose 
of the plug immediately, to avoid a possible shock hazard by
inadvertent connection to the mains supply. 
 
If this product is not provided with a mains plug, or one has to be
fitted, then follow the instructions given below:  
 

IMPORTANT: 

The wires in this mains lead are coloured in 

accordance with the following code: 

GREEN-AND-YELLOW  

: EARTH 

BLUE 

 

  : 

NEUTRAL 

BROWN   

: LIVE 

 

WARNING: 

This apparatus must be earthed. 

 
As the colours of the wires in the mains lead of this apparatus  may
not correspond with the coloured markings identifying the terminals in
your plug proceed as follows: 
 
The wire which is coloured GREEN-and-YELLOW must be
connected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol ç or coloured GREEN or GREEN-and-
YELLOW. 
 
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK. 
 
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured  RED.  
 

When replacing the fuse only a correctly rated approved type
should be used and be sure to refit the fuse cover.

 

  

 

IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN.

For U.S.A

 

TO THE USER 

This equipment has been tested and found to comply with 
the limits for a Class A digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of 
this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required 
to correct the interference at his own expense. 
 

CAUTION 

Changes or modifications to this equipment not expressly 
approved by TEAC CORPORATION for compliance could 
void the user's authority to operate this equipment. 

For the consumers in Europe 
 
WARNING 

This is a Class A product. In a domestic environment,  this
product may cause radio interference in which case the
user may be required to take adequate measures. 
 

Pour les utilisateurs en Europe 
AVERTISSEMENT 

Il s'agit d'un produit de Classe A. Dans un  environnement
domes-tique, cet appareil peut provoquer des interférences
radio, dans ce cas l'utilisateur peut être amené à prendre
des mesures  appro-priées. 
 

Für Kunden in Europa 
Warnung 

Dies is eine Einrichtung, welche die Funk-Entstörung  nach
Klasse A besitzt. Diese Einrichtung kann im  Wohnbereich
Funkstörungen versursachen ; in diesem  Fall kann vom
Betrieber verlang werden, angemessene  Maßnahmen
durchzuführen und dafür aufzukommen.

 

Содержание US-224













































Отзывы: