Tascam US-200, Руководство пользователя

Страница: 11 / 32

TASCAM US-200
11
y
USB port
Use the included USB cable to connect
this unit to a USB 2.0-compatible
computer.
NOTE
The US-200 obtains power from the host
•
computer via the USB cable. In rare cases,
a computer’s USB port may not be able to
supply enough power to operate the US-
200.
This is not compatible with USB 1.1 (12
•
MHz) and cannot be used to connect by
USB 1.1.
This is not compatible with computer
•
Suspend (Sleep) mode. For this reason,
the unit might not operate properly after
a connected computer is brought out of
Suspend (Sleep). In this case, disconnect
the USB cable once and then reconnect it.
u
PHANTOM (+48V) switch
Use this switch to p48 V phantom
power to microphone input connectors 1
and 2.
CAUTION
Set this switch to
•
OFF before turning
this unit’s power on or off (connecting or
disconnecting the USB cable).
Before changing the setting of this switch
•
to ON or OFF, turn the LEVEL knob to
its minimum level. Depending on the
microphone connected, a loud noise could
occur, which might damage equipment or
harm hearing.
Do not connect or disconnect
•
microphones when this switch is set to
ON.
Turn this switch on only if you are using
•
condenser microphones that require
phantom power.
Unbalanced dynamic microphones should
•
never be connected to phantom-powered
connectors.
Some ribbon mics can be damaged by
•
phantom power. If unsure, do not supply
phantom power to a ribbon mic.
When this switch is
•
ON, if the unit is
connected to a computer running on
battery power, the battery will be drained
more quickly.
Do not use phantom power when line
•
level equipment is connected to an XLR
connector.
2 − Names and Functions of Parts