TASCAM US-122L
1
Overview
4 – Control panel settings
The
Control Panel
lets you make various
settings for the US-122L’s functionality.
The
Control Panel
is divided into the fol-
lowing two sections.
Status section
This shows the current status of the driver
and the connected hardware.
You cannot edit the settings from this sec-
tion.
Setting section
Here you can edit the various settings of
the driver.
Driver settings
Audio Performance
The US-122L driver temporarily stores
input and output audio samples in buffers.
The
Audio Performance
setting lets you
adjust the buffer size. The
Lowest Latency
setting is the minimum buffer size, and the
Highest Latency
setting is the maximum
buffer size.
A smaller buffer size will reduce the delay
when monitoring the input signal, but will
require your computer to perform the pro-
cessing faster. If the processing does not
occur in time (e.g., if other system opera-
tions are occurring), you may hear clicks,
pops, or dropouts in the audio signal.
A larger buffer size provides more safety
against such problems caused by other sys-
tem activities, but will produce greater
delay when monitoring the audio signal.
The US-122L lets you select the buffer size
that works best for your system.
