Tascam RC-F82, Руководство пользователя

Страница: 4 / 20

4
TASCAM RC-F82
1 – Introduction
Thank you very much for purchasing the TASCAM RC-F82
Fader Unit.
Before connecting and using the unit, please take time to
read this manual thoroughly to ensure you understand
how to properly set up and connect the unit, as well as
the operation of its many useful and convenient functions.
After you have finished reading this manual, please keep
it in a safe place for future reference.
You can also download the Owner's Manual from the
TASCAM web site (http://www.tascam.com).
Features
Eight 100 mm faders (with dust protection) for
•
controlling the mix or input trim level for each channel
on the HS-P82 unit
Eight rotary knobs for controlling the input trim level,
•
mixer pan or mixer level for each channel on the
HS-P82 unit
Two rotary controls for the stereo mix (for master and
•
solo levels)
Eight dedicated keys for enabling/disabling SOLO and
•
recording MUTE functions
Eight dedicated keys for calling up channel setup
•
screens and enabling/disabling recording
A dedicated key for the stereo mix for calling up the L/
•
R SETUP screen and for enabling/disabling recording
Four direct access (shortcut) buttons to open MIXER
•
SETUP and REMOTE SETUP screens
Transport control functions
•
Balanced XLR LINE IN connectors (STEREO)
•
Balanced XLR LINE OUT 1 & 2 connectors (two stereo
•
pairs)
Convenient talkback functions for use in field recording
•
environments
Balanced XLR RETURN IN connectors for talkback
•
functions (includes level adjustment and solo control)
RETURN signal can be monitored using headphones
•
Built-in talkback microphone; this mic’s signal can be
•
output from the LINE OUT 2 connectors
Headphones connector with level knob for monitoring
•
Headphones monitoring can be set to STEREO, MONO,
•
L MONO or R MONO
Designed to be placed on top of an HS-P82 unit, the
•
RC-F82 has the same footprint
Connects with an HS-P82 unit by PS/2 (and is also
•
powered by this connection)
PS/2 external keyboard can be connected
•
Included items
The included items are listed below.
Take care when opening the package not to damage the
items. Keep the package materials for transportation in
the future.
Please contact the store where you purchased this unit
if any of these items are missing or have been damaged
during transportation.
Fader unit (RC-F82)
•
..................................................................... 1
Connection cable (1.2m-long PS/2 cable)
•
.......................... 1
A warranty card
•
........................................................................... 1
Owner’s manual (this manual)
•
............................................... 1
About this manual
In this manual, we use the following conventions:
The names of keys and controls are given in the
•
following typeface:
MARK
.
Messages on the unit’s display are shown like this:
•
ON
Additional information is introduced in the styles
•
below when needed:
TIP
Useful hints when using the unit.
NOTE
Explanation of actions in special situation and
supplement.
CAUTION
Instructions that should be followed to avoid injury,
damage to the unit or other equipment.
Trademarks
TASCAM is a trademark of TEAC Corporation, registered
•
in the U.S. and other countries.
Other company names, product names and logos
•
in this document are the trademarks or registered
trademarks of their respective owners.